High-Strength Permanent Rivets (B7-Compatible)
The term ASTM A193 B7 Rivets is not a standard specification, as $\text{A193 B7}$ primarily applies to bolts and studs. However, for applications requiring a permanent, non-removable joint with strength comparable to $\text{B7}$ bolting, Zeron Fasteners can supply Specialized High-Strength Rivets manufactured from compatible alloy steel materials. Traditional hot-driven rivets are typically made from softer steel to facilitate forming the head, but critical structural and high-temperature environments demand superior performance. These high-strength fasteners are used in applications like bridge construction, heavy machinery frames, and structural connections where the joint must withstand high shear and tensile stress without possibility of loosening.
Related Products
Specialized High-Strength Rivets Chemical Composition
| Specification | Element | Composition (%) |
|---|---|---|
| Alloy Steel (B7 Compatible Base) | Carbon (C) | 0.38 - 0.48 |
| Manganese (Mn) | 0.75 - 1.00 | |
| Phosphorus (P) | Max 0.035 | |
| Sulfur (S) | Max 0.040 | |
| Chromium (Cr) | 0.80 - 1.10 | |
| Molybdenum (Mo) | 0.15 - 0.25 |
Specialized High-Strength Rivets Mechanical Properties
| Specification | Property | Value |
|---|---|---|
| Achieved High-Strength Status (B7 Equivalent) | Minimum Shear Strength | Dependent on Diameter |
| Achieved Tensile Strength, min | $\approx 125$ ksi (860 MPa) (Before Forming) | |
| Hardness Range (HRC) | 23 - 35 HRC (Post Heat-Treatment) | |
| Typical Application Standards | Hot-Driven Rivet Standard | ASTM A502 |
| Bolting Counterpart (for strength comparison) | ASTM A193 B7 |